How to Setup a Wireless Router
Fast internet is now something we cannot do without. A business would suffer great losses if its internet connections were slow. This allows for you to go out and buy a new faster router. You then need a way to set it up. You shall need some steps to follow in doing this.
Have the router in a convenient place, where all devices that need a connection are within its range. Make sure it is not sitting in a Wi-Fi dead spot. If not, you need a cable to connect it to the gateway Ethernet port. You can also go for the mesh-style router. This usually comprises a node at the gateway, then others spread out in the house. This is how all areas shall have a network. You can be informed more at the Router Login Netgear website. Have the router on a flat surface while you are setting up.
You need to work on a gateway. Some routers will come with a WAN port for connecting to a gateway preconfigured. For the rest, they shall be picking them and assigning them as WAN or LAN. You need to first disable the current router. Even if it is part of the modem, you need to. This way, you will not have two routers competing. If you leave them that way, you will not manage a meshwork. Using the gateway’s IP address, go to a browser and find its configuration page. Find the allocation mode tab and choose passthrough option. If you can’t see this, call your ISP. They may have blocked you there. Now is the time to turn off the modem’s Wi-Fi access point. It shall be redundant if left running. After this, you need to reboot the gateway.
Connect the gateway to your new router. While still off, you need to connect it with an Ethernet cable, from its LAN port to the router’s WAN port. You then connect your PC to the router and the phone line to the modem. Start the gateway. You may think it is not working, but give it some time. Do the same for the router.
Next, change the admin password on the wireless router. You can use its smartphone app to do this. If not, there is always the browser-based choice. Enter the router’s IP address and you’ll see what you need. There should be an admin username and password. Follow this by a changing the password. Keep the password safe.
Let the firmware update run. It will most likely be dated. The device should attempt an automatic update cycle. You can reboot it after it finishes. Next, set up a new password for your Wi-Fi network. You can do this in the connectivity tab. Use only the WAP2 encryption, as it is safer than the WEP one.